Built on the success of GlasGrid, the GlasGrid® CG (CompoGrid) line of products meets the ever-increasing demands for road reinforcement and acts as an effective moisture barrier. GlasGrid® CG is a combination of glass fiber mesh and non-woven geotextile.

A high-strength, high-modulus fiberglass reinforced geotextile reduces the possibility of thermal cracking and crack-related stresses on the asphalt surface. Non-woven fabric plays an important role as an effective moisture barrier for the entire pavement.

When installed between two layers of asphalt, GlasGrid® CG has a reinforcing effect on both hard and soft packs. The system has two main uses: increasing life expectancy, limiting maintenance costs to new pavements and as a way to delay the recurrence of cracks in the improvement of old pavements. GlasGrid® CG is widely used in many areas from highways to urban interchanges, bridges, parking lots, civilian airports and military ...

GlasGrid® CG được thiết kế để thi công dễ dàng với thiết bị và kỹ thuật rải đường.

Đáp ứng các yêu cầu thiết kế - Dễ dàng thi công.

Có thể sử dụng trong các điều kiện bề mặt khác nhau.

The available standard categories are 50, 100 and 200 KN / m.

The lightweight version (GCL *) is available in two standard categories: 50 and 100 KN / m

Works as a wet diaphragm.

Non-woven fabric layer. - Increase the life of works.

High heat resistance. - No damage due to hot asphalt.

Good milling quality. - High recyclability.

Cost savings, time for works.

Reduce maintenance costs.